Bases that are made of paving products such as block paving are Not Recommended For Use. Surfaces with fewer joints that are usually larger provide the best finishes. It is recommended that you get advice from the resin supplier beforehand. The suitability of a base can vary depending on the system being used. Always ensure the base is suitable for the traffic load that will be expected to carry once the resin system is applied. Make sure your base is level, any damaged sections or cracks are properly repaired before applying the resin. Any remaining contaminants such as oil, film algae or fungus will have to be removed with a good degreaser.Įnsure the base is in good condition because the finish and life-expectancy depend on the durability of the base. If needed use a sealant if necessary to ensure the resin will adhere to the base. Usually, the surfaces are tarmac, concrete, asphalt, or other singular stone material as long as it has been cleaned including the removal of loose materials and dust and then properly prepared. Resin-bonded systems can be used on existing or new bases. This process is commonly referred to as broadcast coating, scatter coating or coating systems.Īnother method is applying the resin over an appropriate base using a squeegee then scatter the aggregate over it before the resin sets. Scatter loose dried aggregate on a coating of resin directly after the resin is applied to the surface. (Gravel-Lok is a resin bonding product) For instructions on this product specifically refer to the official installation instructions, not the below information which is general in nature. The following is general information pertaining to resin boding. Reduces hot temperatures on the surface.ADA compliant when used with 1/8-inch to 1/2-inch size stones.It great for residential garden pathways, stonescaping around your flower beds in the garden, french drains, and tree surroundings. If you want your white stones to remain white, do not use this formula, they will change color. It's a great choice for residential walkways, patios, garden paths, stonescaping, french drains, along flower beds in gardens, tree pits, and surroundings.
#DRIVEWAY GRAVEL NEAR ME TRIAL#
Each is available in a one-gallon trial size, 5-gallon container, or a 50-gallon drum.Ĭomes colorless or light yellow in color that is ideal for white or other stone colors.
This gravel locking product is available in two different formulas, clear and amber. It is also ideal for municipalities, parks, other porous surface projects, and stonescaping in residential areas.Ĭombining natural pebbles with a polyurethane binder and then apply with a trowel to create the surface you are looking for that is decorative and attractive. When this adhesive is used with Cell-Tek's LSG Series™ Load Support Grid, it will create an absorbent, durable natural stone surface that can be used in many different civil, residential and industrial applications. Gravel-Lok™ single element, moisture curing liquid adhesive that was designed to bond a variety of aggregates. The end result is a firm walking surface which is also permeable, allowing water to pass through. Gravel-Lok, also known as "Gravel Glue" is a Polyurethane-based resin which when binds stones together when applied.
0 kommentar(er)
